<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: Create Device Template

To add a specific device several times, you can create a device template from this device. When you create a device template, PRTG saves information for nearly all sensors on this device to a template file that you can later use in combination with the auto-discovery (restrictions apply for a few sensors). Custom device templates are also available in the PRTG Sensor Hub.

In the device template, PRTG saves all relevant sensor settings except for settings that you set on other objects, such as schedules, notification triggers, and access rights. PRTG automatically sets these settings to inherited settings.

To create a device template, right-click a device in your device tree. From the context menu, select Create Device Template to open the Create Device Template dialog.

Create Device Template Assistant

Create Device Template Assistant

Template Settings

Setting

Description

Template Name

Enter a meaningful display name for the device template.

i_round_blueIf the name contains angle brackets (<>), PRTG replaces them with braces ({}) for security reasons. For more information, see the Knowledge Base: What security features does PRTG include?

Exclude Sensors

Enable the check box in front of the sensors that you want to exclude from the device template.

i_round_blueSensors that you cannot save in device templates do not appear in this list.

i_round_blueSensors that dynamically scan for available monitoring items when you add the sensor to a device do not appear in this list. PRTG automatically includes these sensors in the device template if they support the device template functionality. You cannot exclude these sensors from the device template.

i_round_redClick OK to save your settings. If you close the dialog without saving, all changes to the settings are lost.

i_round_blueDevice templates only save the sensors on the device and the sensors' settings including the channel settings. They do not save the device itself or the device's settings. To successfully create a device template, you must add sensors to the device (either manually or via the auto-discovery) and the sensors must be device template capable.

After you save your device template file, you see a message where you can review the sensors that the new device template contains. Click OK to finish. PRTG stores the device template in the \devicetemplates subfolder of the PRTG program directory. Your device template file contains all sensors of the original device, including the sensors' settings.

Before the next auto-discovery, choose the Auto-discovery with specific device templates setting and select the name of your new device template from the list. PRTG then tries to discover the stored sensors. If the physical device answers to a sensor request, the sensor is added to the respective device in PRTG.
i_square_cyanFor more information, see section Auto-Discovery.

Restrictions

There are a few settings that you cannot save in a device template so PRTG uses the default settings:

  • The Dependency Type setting Master sensor for parent in the Schedules, Dependencies, and Maintenance Window section,
  • The Result Handling setting Store result because this setting is only intended for debugging purposes,
  • Settings in the Access Rights section to avoid security flaws, and
  • Notification triggers settings that you set on other objects, for example, a device or group. PRTG saves, however, notification triggers settings that you set directly on a sensor.

i_round_blueIn general, you cannot save all sensor settings and channel settings (for example, channel limits of dynamically created channels) of sensors that dynamically scan for available monitoring items when you add the sensor.

Furthermore, because of internal restrictions, PRTG does not save every sensor in a device template.
i_square_cyanFor more information, see section List of Sensors without Device Template Capability.

Device Template Updates

Once a device template is created, it is not possible to add additional sensors to it via the PRTG web interface. If you want to create a device template with an extended set of sensors, you need to create a new template.

i_round_redWhen you save a new device template, PRTG updates all internal sensor IDs in this template. Because of this, PRTG creates all sensors that the new device template contains anew on the device to which you apply the template, even if the same sensors have already been created on this device with a different device template.

i_round_blueYou cannot delete device templates via the PRTG web interface.

i_podYou cannot edit device template files in PRTG Hosted Monitor.

Device Template Filtering

You can include and exclude sensors from existing device templates. For details, see the Knowledge Base: How can I include and exclude sensors from device templates?

More

i_square_blueKnowledge Base

What security features does PRTG include?

How can I include and exclude sensors from device templates?

Advanced Procedures